Older Garland, especially neighborhoods built before 1970, runs on galvanized steel supply lines and cast iron drains. Galvanized pipe rusts shut from the inside over 40 to 60 years, and most of Garland's galvanized is past that window — it fails at the threaded joints, where cutting the threads decades ago left the pipe wall thinnest. Falling pressure at the far fixtures and a rusty tint when you first open a tap are the pipe telling you its inside diameter is closing up. Street pressure matters too: parts of DFW run high supply pressure, and above 80 psi Texas code expects a pressure reducing valve — we check your static pressure on every repair, because fixing the pipe without addressing 90 psi behind it is half a repair.
Repairing one galvanized joint in a system where every joint is the same age is usually a short-term fix, and we'll say so before you spend money on it — a spot repair stops the flooding today, and we price a repipe alongside it in writing so you can decide with numbers. Garland's older homes also sit on the same moving Blackland Prairie clay as the rest of the Metroplex. If your water bill stayed high after a burst repair, or the meter moves with every fixture off, that points under the floor — our Garland slab leak page explains how electronic detection finds it without tearing up your house. We explain reroute and spot repair options in writing.
